|
|
|
|
|
|
|
|
Adjustable electric rolling wheel frame
|
|
Technical parameters
Addendum to technical parameters for serial entries
1 Rated load-bearing capacity 200 tons
2 Adapt workpiece diameter φ 1000mm-φ 5500mm
Workpiece length 2m-30m
3 Roller line speed 100-1000 mm / min AC frequency conversion speed regulation
4 roller drive motor power 2 × 3kw
5 Roller Specification φ 550 × 220mm 45 # Forging Steel Wheel
6 Track model/center distance QU 80/2250mm
7 cars walking speed 300 ~ 3000 mm / min AC frequency conversion speed regulation
8 electric control box double electric control box
9 operation mode wireless remote control box operation
III. Main technical requirements for equipment
The adjustable electric walking sandblasting and spray painting roller stand consists of a group of active roller racks and a group of slave roller racks. The active roller roller wheel rotation is driven by an AC motor and the inverter stepless speed adjustment. The speed range is wide, the rotation smoothness is good, and the low speed characteristics are hard. The motor is equipped with a protective cover.
The roller stand is equipped with strict dust protection measures. The bearing position is sealed. The drive motor and the walking motor of the roller stand are explosion-proof motors to meet the environmental needs of sandblasting and spray painting.
|
|
|
|
|
|
|
|
|
|
