|
|
|
|
|
|
|
|
Automatic welding operator
|
|
1. The equipment CZ10-4 × 7 welding operator can complete the outer ring seam or longitudinal seam welding of the φ 440 ~ φ 3500 mm cylinder body, and the inner ring seam or longitudinal seam welding operation of the φ 600mm ~ φ 3500 mm cylinder body is convenient and the production efficiency is high.
Two. Main technical parameters
CZ10-4 × 7 welding operator
A: Performance overview
The entire machine adopts a cross-shaped structure, the beams can be electrically telescopic, up and down, the cross-arm telescopic uses an AC motor, the imported inverter is stepless, the speed digital display, and the speed parameters can be preset.
The beam lift drive adopts chain drive of chain wheel, and its effective lift stroke is 4000mm; The effective telescopic stroke is 7000 mm. The lift drive is driven by an AC motor via a worm gear reducer at a speed of 0.68 m/min, and has a dual mechanical and electrical protection function.
The vertical column can be manually rotated about 180 degrees. The vertical column rotation adopts the reloading support produced by German technology. It has its own high-precision gear, flexible rotation, and a rotary mechanism with a manual tightening device to ensure the stability of the nose.
B: Main performance characteristics
The column and beam manufacturing adopts high-quality steel plate bending, the annealing treatment process after welding, and the guide rail is made of steel planing No. 45, ensuring that the guide rail is operated reliably and has a long life in various use conditions.
C: There is a cross-beam lifting and domestic exclusive use of double crash prevention safety devices. First, the motor of the lift motor is selected to use the brake motor for primary protection, and a dry and wet clutch is added to the side of the drive drive to protect the drive. Once the lifting chain is broken, a crash safety device is provided, and the beams will not fall and injure the operators and damaged equipment;
D: The beam retractions adopt variable frequency speed regulation, the low speed torque is large, the response speed is fast, there is no crawling, vibration phenomenon, the frequency conversion speed regulation has the over flow, over pressure, over moment protection.
E: The electrical system is centralized, with remote control case(with common functions such as towing adjustment, beam adjustment, welding machine starting and stopping, and welding wire manual in/out).
|
|
|
|
|
|
|
|
|
|
