Product Description

First, the basic configuration 
 host specifications (gauge) 4000 mm 
 guide rail length is 12000 mm 
 2 sets of numerical control body 
 1 set of numerical control system of Shanghai jiaotong university arm 
 HPR160 1 plasma power 
 lateral line drag chain drive 
 vertical line drag chain drive 
 bilateral driver drive way 
 arc pressure increase 1 set of control unit 
 initial positioning, 1 set of collision device 
Second, the matching function 
 automatic programming software (FastCAM) 1 set 
Three, main technical index 
 effective cutting width of 3200 mm 
 effective cutting length is 10000 mm 
 the machine running speed is 100-6000 - mm/min 
 cutting thickness (fire) 6-150 - mm 
 (plasma) see attached plasma cutting thickness 
 cutting torch lifting distance (fire) 200 mm 
 cutting torch lifting distance (plasma) 250 mm 
 linear positioning accuracy of + / - 0.2 mm/m 
 repeat accuracy + / - 0.3 mm/m 
 longitudinal guidance accuracy + / - 0.2 mm/m 
 the level between the two guide plus or minus 0.3 mm/m 
 the parallelism between the two guide rail (+ / - 1 mm 
 laying-out precision is 0.5 mm or less 
 setting speed of error of plus or minus 5% or less 
 Ra12.5 cutting surface roughness 
Fourth, working conditions 
 - 10-45 ℃ ambient temperature 
 relative humidity < 90% without condensation 
 surrounding environment ventilation. No greater impact 
 supply voltage to 2 x 220 v + 10% / % 
 power frequency 50 HZ 
 work cycle can work continuously for 24 hours 

Payment Terms︰ TT/LC

Product Image